Printer Usage And Care - Casio MD-910 Technical Manual

1 Printer usage and Care

(1) Use recommended register paper. Otherwise, printing quality and the life of the print head will not be
guaranteed. The width of paper must meet the specifications.
(2) Never allow a mechanical impact (including the entry of foreign matter) to the print head surface.
(3) Any dust on the print head surface must be wiped off by an applicator soaked in ethanol or the
equivalent.
(4) The dedicated ribbon cartridge should be taken off when the printer is carried or not used for a long
period.
(5) Do not feed current to the print head if it is wet or moist. If current is fed, the print head may be
damaged. If the print head is wet or moist, dry it fully and then start printing.
(6) Inserting register paper
• Cut the top end of the register paper
straight (it should never be fluffed or bent)
and insert it.
• When the top end of the register paper
comes out of the print head, check that it
is set straight and then pull it.
(7) Removing register paper
• Before removing the register paper, be sure
to stop feeding current to the print head.
• Pull out paper straight in the direction of
paper exit.
— 1 —