Table of Contents
Advertisement
(5) Apply Froil G-311S to the pivot of the
PF cam and the cam of the PF cam
gear.
(6) The cam faces inside. Insert the PF
cam gear in the pivot of the PF cam.
Note:
1) When inserting the gear, turn the
cylinder cam assembly beforehand
so that the claws of the paper feed
gear are horizontal. At this time, the
squared notch of the cylinder cam
assembly should face the back.
2) Four-sectored protruding parts of
the PF cam gear should face the
outside.
Engage the center of the protrud-
ing part that is horizontal when the
inside cam faces down with the pa-
per feed gear.
(7) Apply Froil G-311S to the two cotter
pin springs and then insert them in
cotter pins.
(8) Put the two cotter pins in the PF cam
gear.
— 19 —
Advertisement
Table of Contents
