23．小腿外套的更换 Replace Legrest `S Coat - EASEPAL EC-385A Maintenance Service Manual

B：稍用力将有电机的另一端的固定丝杆的轴承座敲下来，这样就可以将丝杆螺母座旋
转出丝杆，从而进行更换。更换步骤按上述逆向操作即可
Percuss pin rocker bearing side of motor, please consult the steps as below of image
轻敲此轴承座
Percuss pin rocker bearing
丝杆螺母及螺母橡胶套座
pin rocker
Take away the
bearing `s nut
23．小腿外套的更换
Replacement of upper outer coating of foot rest
Upper part:
A：首先将小腿组件拆下或将小腿升至最高位，取下小腿电机中销轴，将小腿翻向上，
然后取下小腿组件的下挡板.
First you should disassemble the whole foot rest or rise the footrest to the highest position,
and then remove the screws fixing the pin of motor.
Turn the footrest up and take away the bottom board of the footrest.
B：旋转小腿行走皮带轮使小腿伸长到最大，取下固定上小腿底部的 4pcs 十字盘头螺钉，
然后拉开皮套侧边的拉链，取下固定上小腿的两个十字盘头螺钉（每侧各两个）
Rotate the belt wheel to extend the foot rest to the longest position,
and remove the screws (4pcs) tightening the upper part of the foot rest.
Unzip the side zipper of the upper outer coating, then remove the screws (2pcs of each side) fixing
the outer coating
轴承座敲下后
After percuss
丝杆螺母座及丝杆螺母座
Disconnect them
旋下的丝杆螺母座
nut part