3．靠背前后盖的拆卸 Disassembly Of The Backrest Cover; 机芯的拆解 Disconnect Robot Mechanism - EASEPAL EC-385A Maintenance Service Manual

3．靠背前后盖的拆卸 Disassembly and replacement of the rear cover and the front cover
A．拉开靠背皮套的拉链,掀开皮套
Unfasten the zippers of the outer cloth of the rear cover.
靠背皮套的 2 边拉链
The zippers of the outer clothing of the rear cover.
B． 取下背盖上的 4 颗螺丝，拿下后背盖
Find 4 pieces of screws fixing the rear cover and remove the screws with a plus screwdriver.
靠背后盖上的 4 枚螺丝
The 4 screws of the rear cover
C． 取下前背盖上的 6 枚螺丝，拿下前背盖
Find 6 pieces of screws fixing the front cover and remove the screws with a plus screwdriver,
and then the front cover can be removed.
4. 机芯的拆解 Disconnect Robot Mechanism
首先把机芯上方有碍机芯取出的线材理清,拆下接线头，还有电机皮带等，然后再进一步拆解
First,clean the wires on the robot , eg: disconnect wire terminals and motor belt.......
理清线材、对插线等
Clean the line and
wire terminals
拆卸皮带
Motor belt