How To Use - Panasonic CS-CE9PKE Operating Instructions Manual

How to use

MODE
To select operation mode
HEAT - To enjoy warm air
• Unit takes a while to warm up. The POWER
indicator blinks during this operation.
• Unit may stops warm air supply for deice. The
deice indicator ON during this operation.
COOL - To enjoy cool air
• To reduce power consumption during COOL
mode, use curtains to screen off sunlight and
outdoor heat.
DRY - To dehumidify the environment
• Unit operates at low fan speed to give a gentle
cooling operation.
FAN - To circulate air in the room
AUTO - For your convenience
• During operation mode selection the POWER
indicator blinks.
• Unit selects operation mode every 10 minutes
according to setting temperature and room
temperature.
To adjust horizontal airfl ow direction
• Manually adjustable.
6
Remote control receiver and
indicator
Remote control
display
AUTO
FAN
SPEED
HEAT
AIR
COOL
SWING
DRY
FAN
OFF/ON OFF/ON
MODE
TEMP TEMP
AIR SWING
FAN SPEED
TIMER TIMER
ON ON SET SET
1 1 2 2 3 3
OFF OFF CANCEL CANCEL
AC RC
SET CHECK CLOCK CHECK CLOCK RESET
Auto OFF/ON button
Use when remote control is
misplaced or a malfunction
occurs. Raise the front panel:
• To use in AUTO mode, press
the button once.
• To use in COOL mode, press
and hold the button until 1 beep
is heard, then release.
• To use in HEAT mode, press
and hold the button until 1 beep
is heard, then release. And
press again until 2 beeps, then
release.
• Press the button again to turn
off.
(Green/Blue)
POWER/DEICE
(Orange)
TIMER
Press and hold for
approximately
10 seconds to show
temperature setting in
°C or °F.
Press to restore the
remote control to
default setting.
Not used in normal
operations.