Loading Nailer - Makita AN942 Instruction Manual

1
1. Adjuster
ASSEMBLY
1. Pusher
3
1. Pusher lever
2. Depress
3. Return
• To adjust the depth of nailing, turn the adjuster so that the arrow above
004299
the adjuster will point to the number indicated on the adjuster. The depth
of nailing is the deepest when the arrow points to the number 1. It will
become shallower as the arrow points to higher number. The depth can
be changed in approx. 1.0 mm increments per graduation. If nails cannot
be driven deep enough even when the arrow points to the number 1,
increase the air pressure. If nails are driven too deep even when the
arrow points to the number 9, decrease the air pressure. Generally
speaking, the tool service life will be longer when the tool is used with
lower air pressure and the adjuster set to a lower number.

Loading nailer

CAUTION:
• Always lock the trigger and disconnect the hose before loading the
nailer.
• Select nails suitable for your work. Insert strip of nails into the magazine.
004300
• Pull the pusher lever to the rear to engage the pusher to the last nail
004301
1
Unloading nailer
CAUTION:
• Always disconnect the air hose before unloading the nailer.
• Pull the pusher lever to the rear. Return the pusher lever back while
004302
keeping the pusher depressed to disengage it from the strip of nails.
1
2
7