Advertisement
DESCRIPTION
The Keypad Microphone (Mic) for Digital
Radios is a full keypad handheld microphone.
The keypad on this microphone is intended to
assist in navigating through the menus on its
parent device, as well as entering information
such as phone numbers and menu picks.
INSTALLATION
1.
Refer to illustration below and attach
hangup clip (1) to vehicle using the two
sheet metal screws and back-up plate
provided. Place back-up plate (4) behind
dashboard. Use flat-head screw (2) in
top mounting hole and hex-washer
screw (3) in bottom mounting hole. Be
certain mounting screws fasten into
holes in back-up plate.
2.
Insert button on rear housing of Mic into
hang-up clip.
3.
Connect the Mic's coiled cord plug to the
microphone connector on the front of the
radio. Align the connector's pins.
4.
Turn the locking collar on the radio end
of the Mic cord 1/4 turn clockwise to
secure it in place.
2
Advertisement
