Installing The Car Cradle; Securing The Cradle; Providing Power To The Navigon 8100T; Tmc (Traffic) Antenna - Navigon GPS Navigation Receiver 8100T User Manual

Getting Started

Installing the Car Cradle

Installing the Car Cradle
Caution!
"Important safety information" on page 10.

Securing the Cradle

1. Clean the mounting surface where you want to secure the cradle. The mounting
surface must be dry and free of dirt and grease.
2. Use the suction cup to fix the cradle to the windscreen.
3. Press the lever on the suction cup forwards.

Providing Power to the NAVIGON 8100T

Included in delivery of the NAVIGON 8100T is a car charger cable with which power
can be supplied to the navigation device by the vehicle's cigarette lighter.
1. Connect the car charger cable to the vehicle's cigarette lighter.
2. Connect the mini-USB socket on the cradle.
The navigation device is supplied with power as soon as it is inserted in the cra-
dle.
Caution! Connect the car charger cable to 12V cigarette lighters only.
Note:
Be sure to insert the USB connector into the
Note: Power is only supplied to the cradle when the NAVIGON 8100T is inserted.
When the device is in the cradle, the USB socket will not operate.

TMC (Traffic) Antenna

The NAVIGON 8100T has an integrated TMC receiver. A TMC antenna is inte-
grated in the car charger cable. Once the NAVIGON 8100T is inserted in the cra-
dle it is ready to receive traffic message updates.
For more information on traffic message updates, see "NAVIGON Lifetime Traffic"
on page 117.
14
Please be sure to read, understand, and follow the safety information in
NAVIGON 8100T User's Guide
NAVIGON, INC.
NAVIGON 8100T
as far it will go.
December 2008
Version 1.1