Stop Recording For A Single Route - Navigon GPS Navigation Receiver 8100T User Manual

Routes
Navigation
7. Type the starting mileage on your vehicle and tap Start.
During a recording, the Logbook icon displays at the top right corner of the screen.
8. Follow navigation to your destination.
Note:
Once logbook recording starts, every movement of the vehicle is recorded, even
when you are not navigating on-route.
After reaching your destination, logbook stops recording and adds an entry to the
Logbook.xls file. The Logbook icon no longer displays.

Stop recording for a single route

Once you have turned on logbook recording, you can stop recording for individual routes.
1. Start Logbook recording. (See page 145.)
2. Create a new route, load a saved route, or select a destination.
3. Tap the Start Navigation button.
The
R
EASON FOR THE
4. Tap
The following message displays.
5. Tap
OK
Logbook is not recording for this trip. However, recording will start again for all
subsequent routes.
98
opens.
T
RIP TAB
.
.
NAVIGON 8100T User's Guide
NAVIGON, INC.
December 2008
Version 1.1