Changing The Starting Point; Entering Route Points - Navigon GPS Navigation Receiver 8100T User Manual

Routes
Accessing the Route Planning Window
2. Select:
• Enter an Address
• Search for a POI
• My Destinations
or
L
•
My Address
specified a home address.)
•
Current Location
3. Enter the starting point. (See the corresponding section of "Destination Selection"
on page 51.)
4. Tap the Set Starting Point button.
The selected destination appears next to the "0", indicating that it is the starting
point of the route.

Changing the starting point

On the R
OUTE
1. Tap the
The S
TARTING
2. Select a different starting point by following the above steps.

Entering route points

Route points are destinations on the route that you want to navigate to.
The flow number for each route point can be found on a button in front of it.
On the R
OUTE
1. Tap the
The
R
OUTE
2. Tap on the button for the desired destination entry type.
3. Enter the route point. (See the corresponding section of "Ways to Search for Des-
tinations" on page 54.)
4. Tap Add to Route button.
5. Repeat these steps for each additional destination that you want to add to your
route.
94
to search for a location address.
to search for a POI.
to select a location from the
lists.
D
AST ESTINATIONS
to select your home address. (Only available if you have already
to specify your current position as the starting point.
P :
LANNING WINDOW
(
Specify Starting Point)
P menu opens.
OINT
P :
LANNING WINDOW
field.
Add Route Point
opens.
P
OINT MENU
NAVIGON 8100T User's Guide
NAVIGON, INC.
F ,
AVORITES
button.
I ,
MPORTED ADDRESSES
December 2008
Version 1.1