Advertisement
MOUNTING OF THE TUBES
First of all, remove the grid which protects the tube sockets.
Mount the ECC82 tubes. then the ECC83 tubes. Do not force
them, this may damage the sockets.
Then mount power tubes on their sockets.Be carefull, as these
tubes have stop pins on the central parts of the mounting
base,Replace the grid and never remove it when the amplifier is
I
coffiected to the mains voltâge, running or not running.
I
I
Correct positioning of the fubes is shown on a sheet
. t
accompanying specifications and coupling possibilities at the end
of this booklet.
Advertisement
