Charging The Unit - Jump n Carry JNC1224 Safety Manual

CHARGING THE UNIT
• Regular charging is a good prac,ce and will extend the life of the baOery
(charge daily if possible).
• Make sure the voltage selector is disconnected.
• Place the unit in a stable and well ven,lated loca,on.
• Check the voltage on the gauge by pressing the test buOon (should be no
voltage).
• Use the built in charger
– NEVER use an external charger. It may damage the jump starter.
– Make sure the charger cable has not been damaged. If it has been
damaged, replace it with a new cable
SAFETY