Advertisement
g.
On the block diagram, right-click the Open FPGA VI Reference function and choose
Select VI from the shortcut menu.
h.
In the Select VI dialog box, select Analog Input (FPGA).vi in the new target and click OK.
i.
In the Project Explorer window, right-click the original FPGA target and select Remove to
delete it from the project.
j.
Save the project to a new directory by selecting File»Save As.
6.
Click the Run button in Analog Input (Host).vi to run the VI. The host VI displays the data being
acquired by the R Series device. To view real-world data, wire a signal source or voltage source to
AI0+ (RMIO pin 68) and AI0– (RMIO pin 34) of the terminal block.
© National Instruments Corporation
9
Getting Started with R Series Intelligent DAQ
Advertisement
