What You Need To Get Started - National Instruments Isolated Analog Input Device NI PXI-4224 User Manual

Chapter 1 About the NI PXI-4224

What You Need to Get Started

NI PXI-4224 User Manual
To set up and use the NI PXI-4224, you need the following:
❑
Hardware
– NI PXI-4224
– One of the following:
• TB-2725 terminal block
• 25-pin D-SUB female connector
– PXI or PXI/SCXI combination chassis
❑
Software
– NI-DAQ 7.3.1 or later
– One of the following:
• LabVIEW
• Measurement Studio
• LabWindows
❑
Documentation
– NI PXI-4224 User Manual
– Read Me First: Safety and Radio-Frequency Interference
– DAQ Getting Started Guide
– PXI or PXI/SCXI combination chassis user manual
– Documentation for your software
❑
Tools
– 1/8 in. flathead screwdriver
You can download NI documents from
™ ™
/CVI
ni.com/manuals
1-2
.
ni.com