Pausing The Stimulation; Automatic Change Of The Sequences; Manual Change Of The Sequences; Stopping The Stimulation - schwa-medico EMP 4 PRO Instruction Manual

Table of Contents

Advertisement

10
schwa-medico

Pausing the stimulation

You can temporarily stop the stimulation by pressing the
word "PAUSE" then flashes on the display.
You can then adjust the position of the electrodes.
Press
again to re-start the stimulation. The intensity levels slowly increase to the level
set before the pause.

Automatic change of the sequences

Some programs consist of several sequences. Each sequence uses different parameters. The
device changes from one sequence to the other automatically. This change is indicated by an
acoustic signal. The sequence number is displayed on the screen at the top right side next to the
"S" symbol.
The intensity of the stimulation is then automatically adjusted depending on the sequence.
It may be necessary to re-adjust the intensities to the desired level.

Manual change of the sequences

If you want to skip one or more sequence(s) manually, first press
stimulation (see pausing the stimulation), then press the "4+" key to select the sequence of
your choice. The sequence number is displayed on the screen at the top right side next to the
"S" symbol.
Press
again to re-start the stimulation. For safety reason the intensity is set back to zero
if you skip a sequence. Adjust the intensity by pressing the "4+" or the "▲" and "▼" keys
(see setting the intensity).
Important note:
The stimulation time can only be changed for programs with a single sequence. The time
cannot be changed for programs with an asterisk

Stopping the stimulation

You can stop the stimulation at any time by pressing the P key or the
time is completed, the stimulation stops automatically. The end of stimulation is indicated by a
double acoustic signal.

Switching OFF the EMP 4 PRO

Press the
device switches OFF automatically if:
• the power supply is too low (battery mode only)
• the device has not been used for 2 minutes.
key to switch OFF the device. This is indicated by an acoustic signal. The
key during the stimulation. The
to temporarily stop the
*
(see program overview).
key. When the therapy
EMP 4 PRO

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents