Vaginal Probes; Cables; Setting Of Intensity Levels - schwa-medico EMP 4 PRO Instruction Manual

20
schwa-medico

Vaginal probes

To be used with URO programs only
Art.-No.
101471
V21B
length
Länge 95 mm

Cables

104765 Pair of electrode cables type 7 (black)
104766 Pair of electrode cables type 7 (red)
104768 Pair of electrode cables type 7 (grey)
104767 Pair of electrode cables type 7 (yellow)

Setting of intensity levels

Do not try to achieve a higher and higher level of intensity. Set the intensity in such a way
that you get a comfortable feeling during the stimulation. Increase the intensity carefully
to a maximum tolerable and then reduce it slightly step by step to a comfortable level.
Note that the intensity settings change depending on the stimulation area and the time.
This is normal and can be explained as follows:
• Resistance of the skin:
Dry skin has a lower conductivity level than damp skin (due to sweating). The skin does
not show the same resistance to linear current on all parts of the body. For example,
the resistance level of horny skin can be twice that of the skin in the hollow of the
knee. The innervation differs greatly according to the area of the body. This results in a
difference of sensitivity.
• Volume of the muscle mass:
If you stimulate muscles with a high volume you will automatically need to set a higher
intensity than for the stimulation of small muscles.
Article
Vaginal probe V21B (type 7)
25 mm Ø
10 10
EMP 4 PRO
Pieces
1