Piper SEMINOLE PA-44-180 Information Manual page 303

PA-44-180, SEMINOLE
PILOT CONFIGURATION
This mode can be accessed by pressing and holding the Nav Mode Button for
more than 2 seconds and then pressing the Nav Frequency Transfer Button for
an additional 2 seconds, while continuing to hold the Nav Mode Button. When
the Pilot Config Mode is entered the unit will show the "SWRV" mnemonic
which is the unit software revision level. Adjustment pages can be accessed by
MODE button presses.
The pilot may adjust two parameters in the pilot configuration, the display
minimum brightness and sidetone volume level. See Table 3-1.
Minimum Brightness (BRIM) will have a range of 0 - 255. The dimmest is 0
and the brightest is 255.
Sidetone volume level is adjusted when SIDE is displayed. Values from 0 - 255
may be selected with 0 being least volume, 255 being the greatest.
Subsequent presses of the MODE button sequences through SWRV, BRIM,
SIDE, and then back to SWRV.
Momentarily pressing the Nav Transfer Button exits Pilot configuration mode.
The Nav returns to
sidetone levels stored in non-volatile memory.
ISSUED: JULY 12, 1995
REVISED: JUNE 20, 1998
Table 3-1 Pilot Configuration
its
pre-Pilot Config state with the new brightness and
SECTION 9
SUPPLEMENT 5
REPORT: VB-1616
11 of 12 9-65