Piper SEMINOLE PA-44-180 Information Manual page 254

SECTION 8
HANDLING, SERV & MAINT
8.33 CLEANING (Continued)
(3) To remove exhaust stains, allow the solution to remain on
(4) To remove stubborn oil and grease, use a cloth dampened
(5) Rinse all surfaces thoroughly.
(6) Any good automotive wax may be used to preserve painted
(d) Cleaning Windshield and Windows
(1) Remove dirt, mud and other loose particles from exterior
(2) Wash with mild soap and warm water or with aircraft plastic
(3) Remove oil and grease with a cloth moistened with
Do not use gasoline, alcohol, benzene, carbon
tetrachloride, thinner, acetone, or window
cleaning sprays.
(4) After cleaning plastic surfaces, apply a thin coat of hard
(5) A severe scratch or mar in plastic can be removed by
REPORT: VB-1616
8-18
the surface longer.
with naphtha.
surfaces. Soft cleaning cloths or a chamois should be used to
prevent scratches when cleaning or polishing. A heavier
coating of wax on the leading surfaces will reduce the
abrasion problems in these areas.
surfaces with clean water.
cleaner. Use a soft cloth or sponge in a straight back and
forth motion. Do not rub harshly.
kerosene.
CAUTION
polishing wax. Rub lightly with a soft cloth. Do not use a
circular motion.
rubbing out the scratch with jeweler's rouge. Smooth both
sides and apply wax.
PA-44-180, SEMINOLE
ISSUED: JULY 12, 1995