installing your dryer
toolS neeDeD foR InStallatIon
Hire a professional to install this dryer properly. If there is a service call performed as a result of poor setup,
adjustment, and connection, it is considered the responsibility of the installer. If you install the dryer you are
responsible.
Make sure you have everything necessary for proper installation (AC 220~240V/50Hz/15A).
1. A GROUNDED ELECTRICAL OUTLET is required. See Electrical Requirements (See page 11).
2. CONDENSING SYSTEM - Condenses, processes and circulates hot and humid air internally using an
internal heat condenser.
See DRyeR exteRIoR
plug
Work top
Control panel
Water tank
Door
filter case
Condenser
leveling feet
Parts
Hose guide
Cable tie
Hose connector
long drain hose(2m)
Manual book
installing your dryer _9
SDC14709-02885C_EN.indd 9
2010-05-31
5:40:07