National Instruments Single-Ended Digital Waveform Generator/Analyzer Modules NI SMB-2163 User Manual page 5

1 PXI Chassis with NI Digital Waveform Generator/Analyzer
2 NI SMB-2163
3 NI SHC68-C68-D2 Cable Assembly
Note To ensure a solid ground connection, tighten the SMB connectors by gently
snapping them into place.
© National Instruments Corporation
Figure 2 shows how the NI SHC68-C68-D2 cable connects the
NI SMB-2163 and the NI digital waveform generator/analyzer.
NI PXI-1042
NI PXI-6551
50 MHz Digital I/O
ACCESS ACTIVE
CLK
IN
PFI 0
CLK
OUT
1
2
3
Figure 2. Connecting a Single-Ended Digital Waveform Generator/Analyzer
4. Make signal connections by connecting SMB cables to NI SMB-2163
signal terminals.
to the NI SMB-2163
5 NI SMB-2163 User Guide