Table of Contents
Advertisement
Quick Links
USER GUIDE
NI SMB-2163
Single-Ended Digital I/O Accessory
Contents
The NI SMB-2163 is a breakout box for National Instruments single-ended
digital waveform generator/analyzer modules. The NI SMB-2163 provides
an easy way to connect to other devices for testing and debugging.
This guide explains how to set up and use the NI SMB-2163 single-ended
digital I/O (DIO) accessory with NI single-ended digital waveform
generator/analyzer modules.
Conventions ............................................................................................ 2
What You Need to Get Started ............................................................... 2
Related Documentation........................................................................... 3
Parts Locator ........................................................................................... 3
Installing Cables...................................................................................... 4
Connecting Signals ................................................................................. 6
Cleaning the Accessory........................................................................... 8
Specifications .......................................................................................... 8
Technical Support Resources.................................................................. 11
Advertisement
Table of Contents
Related Manuals for National Instruments SMB-2163
Summary of Contents for National Instruments SMB-2163
-
Page 1: Table Of Contents
The NI SMB-2163 provides an easy way to connect to other devices for testing and debugging. This guide explains how to set up and use the NI SMB-2163 single-ended digital I/O (DIO) accessory with NI single-ended digital waveform generator/analyzer modules. -
Page 2: Conventions
This font is also used for the proper names of disk drives, paths, directories, programs, subprograms, subroutines, device names, functions, operations, variables, filenames and extensions, and code excerpts. What You Need to Get Started To set up and use the NI SMB-2163, you need the following items: ❑ SHC68-C68-D2 cable assembly ❑... -
Page 3: Related Documentation
• NI digital waveform generator/analyzer specifications—This printed document provides specifications for your module. Parts Locator Refer to Figure 1 to locate connectors on the NI SMB-2163. STROBE DIO 0 DIO 1 DIO 2 DIO 3... -
Page 4: Installing Cables
Notes Do not use cables other than the NI SHC68-C68-D2 cable with this accessory. Do not use the NI SMB-2163 accessory with differential digital signals, such as the digital pattern output of the NI PXI-5421 signal generator. The NI SMB-2163 is not compatible with the NI 653X products. - Page 5 3 NI SHC68-C68-D2 Cable Assembly Figure 2. Connecting a Single-Ended Digital Waveform Generator/Analyzer to the NI SMB-2163 Make signal connections by connecting SMB cables to NI SMB-2163 signal terminals. Note To ensure a solid ground connection, tighten the SMB connectors by gently snapping them into place.
-
Page 6: Connecting Signals
SMB connectors on the NI SMB-2163. Connections that exceed any of the maximum ratings for the NI SMB-2163 Caution or the NI digital waveform generator/analyzer can damage the device and the computer. - Page 7 Refer to the NI Digital Waveform Generator/Analyzer Help at Program Note Files»National Instruments»NI-HSDIO»Documentation»NI Digital Waveform Generator/Analyzer Help for information about the number of available DIO channels on your device. DIO <20..31> may not be applicable to your device. © National Instruments Corporation NI SMB-2163 User Guide...
-
Page 8: Cleaning The Accessory
Do not connect signals to these channels. For additional shielding, you can connect the shield ground connector on the Note NI SMB-2163 to earth/hard ground. This terminal is connected to the shielded enclosure ground. The shield ground lug is shown in Figure 1. Cleaning the Accessory Disconnect all cables to the accessory before cleaning. - Page 9 General Specifications Installation Category ......II Pollution Degree (indoor use only) ..2 Safety The NI SMB-2163 meets the requirements of the following standards of safety for electrical equipment for measurement, control, and laboratory use: • IEC 61010-1, EN 61010-1 •...
- Page 10 Electromagnetic Compatibility To reduce unwanted electromagnetic noise the NI SMB-2163 may emit or receive, you may want to install the snap-on noise-supression device (ferrite) included with the accessory. For more information on installing the ferrite, refer to the How to Install Ferrite Noise-Suppression Devices document.
-
Page 11: Technical Support Resources
Technical Support Resources NI Web Support National Instruments Web support is your first stop for help in solving installation, configuration, and application problems and questions. Online problem-solving and diagnostic resources include frequently asked questions, knowledge bases, product-specific troubleshooting wizards, manuals, drivers, software updates, and more. Web support is available through the Technical Support section of ni.com... - Page 12 *323660A-01* Product and company names mentioned herein are trademarks or trade names of their respective companies. For patents covering National Instruments products, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your CD, or ni.com/patents. 323660A-01 Sep03 ©...