camera operation
y moTion : This product generates signals each time an object movement is
❶
MM I f the SPECIAL menu screen is
displayed, use the Function Setup
switch so that the arrow indicates
'MOTION'.
❷MM S elect a desired mode using
the Function Setup switch.
- DET.AREA : Set the areas of motion detection.
y SEL AREA : Select from four areas that users want.
y MODE : Determine whether to use the selected area.
y TRANSPARENCY : Adds or removes transparency from the masking area.
y TOP/BOTTOM/LEFT/RIGHT : Area location can be adjusted.
y RETURN : Return to the MOTION DET menu.
- SENSITIVITY : Set the sensitivity of the motion detection. When you adjust the
- RETURN : Return to the SPECIAL menu.
ExiT
Select a desired EXIT mode using the Function Setup switch depending on the
camera purpose.
y saVE : Save the current settings and exit the MAIN SETUP menu.
y noT saVE : Do not save the current settings and exit the MAIN SETUP menu.
y rEsET : Revert camera to factory settings. (The language, communication and
28_ camera operation
detected in the four areas of the screen so efficient monitoring can be
achieved.
higher level, the more sensitive.
lens settings will remain the same).
MOTION DET
AREA
▶
1. DET.
SENSITIVITY
2.
RETURN
3.
I
5
IIIIIIIIII
IIIIIIIIII