Back-Panel Features And Indicators; Nic Indicators - Dell PowerEdge SC1425 Installation And Troubleshooting Manual

Possible system board resource and/or
system board hardware failure.
Possible expansion card failure.
Other failure.
The system is in a normal operating
condition after POST.
Back-Panel Features and Indicators
Figure 2-2 shows the controls, indicators, and connectors located on the system's back panel.
Figure 2-2. Back-Panel Features and Indicators
NIC Indicators
Figure 2-3. NIC Indicators
Table 2-3. NIC Indicators
Indicator Indicator Description
Type Code
Activity Off When off at the same time that the link indicator is off, the NIC is not connected to the network or the NIC is disabled in the
System Setup screen. See "Using the System Setup Program" in the User's Guide.
Blinking Indicates that network data is being sent or received.
Link Off When off at the same time that the activity indicator is off, the NIC is not connected to the network or the NIC is disabled in the
System Setup screen. See "Using the System Setup Program" in the User's Guide.
See "IRQ Assignment Conflicts" in "Finding Software Solution." If the problem persists, see
"Getting Help."
See "Troubleshooting Expansion Cards" in "Troubleshooting Your System."
Ensure that the diskette drive, optical drive, and hard drives are properly connected. See
"Troubleshooting Your System" for the appropriate drive installed in your system.
If the problem persists, see "Getting Help."
Information only.