Table of Contents
Advertisement
Resource Configuration:
Advanced
Resource Configuration
PCI Latency Timer (PCI Clocks)
Primary Graphics Adapter
AGP Data Rate
AGP Fast Write
F1:Help
Esc:Previous Menu
PCI Latency Timer (PCI Clocks): The default is 32. It is recommended to
keep the default value unless the installed PCI expansion cards'
specifications require other settings.
Primary Graphics Adapter: If both AGPcard and PCI graphics card are
installed on the mother board, you may use this option to select PCI or AGP
as the primary graphics adapter.
AGP Data Rate: The default setting is [Auto]. You may select between [8X] or
[4X] for an AGP 3.0 card, or select among [4X], [2X], [1X] for an AGP 2.0
card.
AGP Fast Write: This allows you to enable or disable the feature of AGP fast
write protocol support.
AMIBIOS SETUP UTILITY - VERSION 3.31a
32
PCI
Auto
Enabled
:Select Item
+/-:Change Values
Enter:Select
[ Setup Help ]
<Enter> to select PCI
clocks. Leave on
default setting for the
best PCI performance.
F9:Setup Defaults
F10:Save & Exit
Sub-Menu
2 3
Advertisement
Table of Contents
