Agc Control - Symbol M2004-I418 Special Operating Instructions

M2004-I418 Special Operating Instructions
(73-39696-418)
Revision A: February 2004

AGC Control

AGC Control is used by the M2004-I400
standard product to prevent mis-decodes and
double decodes when in Omni-directional and
Semi-Omni-directional modes. In order to
decode "Low Density" barcodes in Omni and
Semi-Omni modes of operation AGC Control
has to be shut off, effectively increasing the
chance of mis-decodes and double decodes.
AGC Control Off
(Default)
AGC Control Off
38