Electromagnetic Compatibility - National Instruments Isolated Analog Input Modules SCC-AI01 User Manual

Environmental
Safety
Note For UL and other safety certifications, refer to the product label, or visit
ni.com/hardref.nsf
appropriate link in the Certification column.

Electromagnetic Compatibility

For full EMC compliance, you must operate this device with shielded cabling.
Note
In addition, all covers and filler panels must be installed.
CE Compliance
Refer to the Declaration of Conformity (DoC) for this product for any additional
Note
regulatory compliance information. To obtain the DoC for this product, visit
ni.com/hardref.nsf
appropriate link in the Certification column.
© National Instruments Corporation
Operating temperature............................ 0 to 50 °C
Storage temperature ............................... –20 to 70 °C
Humidity ................................................ 10 to 90% RH, noncondensing
Maximum altitude .................................. 2,000 meters
Pollution Degree (indoor use only) ........ 2
The SCC-AIXX meets the requirements of the following standards
for safety and electrical equipment for measurement, control, and
laboratory use:
• IEC 61010-1, EN 61010-1
• UL 3111-1, UL 61010B-1
• CAN/CSA C22.2 No. 1010.1
, search by model number or product line, and click the
Emissions ............................................... EN 55011 Class A at 10 m
Immunity ................................................ Evaluated to EN 61326:1997/
CE, C-Tick and FCC Part 15 (Class A) Compliant
The SCC-AIXX meets the essential requirements of applicable European
Directives, as amended for CE marking, as follows:
, search by model number or product line, and click the
FCC Part 15A above 1 GHz
A2:2001, Table 1
13 SCC-AI Series Isolated Analog Input Modules