Combined Timer - Zibro SC13 series Operating Manual

TIMER ON
Start
Off
6 h
TIMER ON OFF
On
Stop
On
fig. 7
Set
2 h
10 h
Example:
To stop the air condtioner 2 hours after setting and start it again 10 hours after setting.
1. Press the TIMER OFF button.
2. Press the TIMER OFF button again to display 2.0h on the TIMER OFF display
3. Press the TIMER ON button
4. Press the TIMER ON button again to display 10h on the TIMER ON display
5. Wait for one second and the digital display area will show the temperature again. The TIMER ON OFF
indicator remains on and this function is activated.
NOTE!
• If the same time is set for both START and STOPPING settings, the stopping time will
automatically increase 0.5hr (the set time displays less than 10hr) or one hour (the set time
displays 10hr or more).
• To change the Timer on/off time, just press the corresponding TIMER button and reset the
time.
• The setting time is relative time. That is the time set is based on the delay of the current time.
WARNING
• Keep the remote controller away from all liquids.
• Protect the remote controller from high temperatures and exposure to radiation.
• Keep the indoor receiver out of direct sunlight or the air conditioner may malfunction.
• Never mix new and old batteries. Never use different battery types (e.g. alkaline and
manganese dioxide) simultaneously.
4
122
Example of timer setting
To start the air conditioner in 6 hours.
1. Press the TIMER ON button, the last setting of starting operation time and the sig-
nal "h" will show on the display area.
2. Press the TIMER ON button to display "6:0h" .
3. Wait for one second and the digital display area will show the temperature again.
The "TIMER ON" indicator remains on and this function is activated.

Combined timer

(setting both ON and OFF timers simultaneously)
TIMER OFF --> TIMER ON
(On --> Stop --> Start operation)
This feature is useful when you want to stop the air conditioner after you go to bed,
and start it again in the morning when you wake up or when you return home.