Decommissioning Procedure; Spare Parts - Heatrae Sadia Multipoint 30H Fitting Instructions Manual

Table of Contents

Advertisement

11. Decommissioning procedure

Isolate electrical supplies and make safe
`
Isolate the water supply
`
Drain the product
`
Remove product
`
Cap pipework
`
Environmental information
The Waste Electrical and Electronic Equipment
(Producer Responsibility) Regulation 2004
This product is outside of the scope of the European
Waste Electrical & Electronic Equipment Directive as
interpreted within the UK.
In the UK this product can therefore be disposed of
through commercial non-WEEE waste facilities.
Heatrae Sadia does not accept any liability under the
WEEE directive.
This product is manufactured from many recyclable
materials. At the end of its useful life it should be
disposed of at a Local Authority Recycling Centre to
realise the full environmental benefits.
Insulation of the product is by means of an approved
CFC/HCFC free polyurethane foam with an ozone
depletion factor of zero and a Global Warming
Potential (GWP) of 3.1.
The product does not contain any substances
harmful to health; it does not contain any asbestos.

12. Spare parts

The following comprehensive list of spare parts is
available for your product. Please refer to the Rating
Label on the side of your product before ordering to
ensure the correct spare part is obtained.
Do not replace with parts not recommended by
Heatrae Sadia - this will invalidate your warranty and
may render the installation dangerous.
Description
Element plate assembly -
30/50 litre 3kW
Thermostat
Thermal cut-out
Indicator light
Element plate gasket
Pressure (expansion) Relief Valve
Temperature/Pressure Relief Valve
Check Valve
Expansion Vessel
Pressure Reducing Valve
Code No
95 606 933
95 612 667
95 612 666
95 607 995
95 611 708
95 607 986
95 905 045
95 607 987
95 607 675
95 607 989
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Multipoint 50h

Table of Contents