National Instruments BNC-2140 User Manual page 36

peak to peak
pF
ppm
pts
R
relative accuracy
resolution
rise time
rms
RSE
S
s
S
SE
settling time
© National Instruments Corporation
a measure of signal amplitude; the difference between the highest and
lowest excursions of the signal
pico farad—a farad is a unit used to measure capacitance
parts per million
points
a measure in LSB of the accuracy of an ADC. It includes all non-linearity
and quantization errors. It does not include offset and gain errors of the
circuitry feeding the ADC.
the smallest signal increment that can be detected by a measurement
system. Resolution can be expressed in bits, in proportions, or in percent of
full scale. For example, a system has 12-bit resolution, one part in 4,096
resolution, and 0.0244% of full scale.
the difference in time between the 10% and 90% points of a system's step
response
root mean square—the square root of the average value of the square of the
instantaneous signal amplitude; a measure of signal amplitude
see SE
seconds
samples
single-ended—a term used to describe an analog input that is measured
with respect to a common ground
the amount of time required for a voltage to reach its final value within
specified limits
G-9
Glossary
BNC-2140 User Manual