Service Hints For Power Box Cable Dressing - Philips HTS8100 Service Manual

EN 10 2. 3139 785 32540

2.2.2 Service Hints for Power Box Cable Dressing

The following procedures should be followed for Power Box Module
assembly after being repaired.
1) For the 5 and 12 poles cables to Audio BD, paste a tape
over them, ensuring it is fi rmly secured to the metal
chassis.
Figure 2-1
2) For the 8 pole cable between the PSU and TI amplifi er,
fold the cable as indicated, making it as close possible to
metal chassis.
Figure 2-2
Measurements Setup, Service Aid & Lead Free Requirements
3) Fold as indicated underneath the metal chassis for both
point 1) and 2). Note that the cables underneath should
be laid as close possible to the metal chassis also.
4) For the FFC cable between Audio BD and TI amplifi er,
fold as indicated, making it sure that the cable should be
outside of both boards.
Figure 2-3
Figure 2-4