Philips HTS8100 Service Manual page 20

EN 20 4. 3139 785 32540
4.1.2 Dismantling of SD9.2 MPEG board and AV board
1) In order to dismantle the SD9.2 Mono Board1070, it is
necessary to remove the Rear Cabinet and the HDMI
assembly (1060 +134). The mounting screws for HDMI
assembly (1060 + 134) are shown in fi gure 4. Remove 4
screws to detach the HDMI assembly (1060 + 134) from
the rear frame 132.
Figure 4-4
2) After removing the HDMI assembly (1060 + 134), remove
4 mounting screws to dismantle the SD9.2 Mono Board
1070 as shown in fi gure 5.
Figure 4-5
Dismantling Instructions & Service Positions
D
E
3) Remove 5 screws to detach the AVIO (SCART)
and AV assembly (1040+135+1020 for /05/12, and
1030+135+1020 for /37/59) from the rear frame 132 as
shown in fi gure 6.
F
Figure 4-6
4) Then remove 3 more screws to detach the AV Board
1020 from the AVIO (SCART) and AV assembly
(1040+135+1020 for /05/12 and 1030+135+1020 for
/37/59) as shown in fi gure 7.
G
Figure 4-7