Pride QUANTUM 610 Owner's Manual page 13

Hide thumbs Also See for QUANTUM 610:

Power Seat Option Installation

Your power chair may be equipped with the power seat

option. While the seat itself may be any one of the styles

offered for this model, the way the seat base attaches to

the power base is different.

To install the power seat:

1. Align the post on the bottom of the power seat base

over the hole in the power seat actuator. See ﬁ gure 10.

2. Slide the post into the actuator and push the friction

lock lever forward.

3. Connect the power seat cable to the power base.

4. Tilt the seat back and slide the rear extension onto the

power seat base.

5. Lower the front extrusion onto the power seat base

until the seat locks into place.

6. Flip down the seat latch safety.

7. Install the controller.

NOTE: Refer to V. "Comfort Adjustments" for more

information on controller installation and adjustment.

Quantum 610

I V. A S S E M B L Y

Figure 9. Controller Routed on a Contour Seat

Figure 10. Power Seat Actuator

www.pridemobility.com

WIRE TIES

FRICTION LOCK

LEVER

POWER SEAT

ACTUATOR

Table of Contents