Configuring The Wireless Lan; Configuring The Wlan; Connection To The Network - Fujitsu LIFEBOOK P701 User Manual

Configuring the Wireless LAN

The optional WLAN device can be configured to establish wireless network connectivity using software
that is built into Windows. Support for most standard security solutions is contained in this software.
Pre-defined parameters will be required for this procedure. Please consult with your network
administrator for these parameters:

Configuring the WLAN

1
Click the Start button, then select Control Panel.
2
If the Control Panel is not in icon view, select either Large or Small icons from the View by: list. Click the
Network and Sharing Center icon.
3
Select "Manage wireless networks" from the left panel.
4
Click on the [Add] button.
5
Depending upon what type of connection you would like to make, make a selection. For an infrastructure
network, select "Manually create a network profile. For ad hoc network, select "Create an ad hoc network".
6
Enter required information. You may need to consult with a network administrator for some of the information.
7
In the event you require assistance, go to the Network and Sharing Center window ([Start] > Control Panel >
Network and Sharing Center), and type in relevant keywords in the Search box.
Connecting to a Network
After you have configured your computer, you can connect to an active network by performing the
following steps:
1
Click on the WLAN icon in the system tray.
2
Select "Connect to a network".
3
Select a network from the list that appears, and click the [Connect] button.

Connection to the network

After you have configured your computer, you can connect to an active network by clicking on the
Wireless Network icon in the system tray:
145 Configuring the Wireless LAN