Panasonic DBS Section 540 Reference Manual page 78

Programming Initial T1 Network Options
SMDR
34. Specify the call types to be included in SMDR. (See Table 2-69 on page
Address
Options
DBS Reset
35. When all assignments are complete, reset the DBS by turning it off then
Page 78
59.)
FF1 2# 2# 6# (0-2)#
0=Outgoing Only
1=Incoming and Outgoing
2=Incoming, Outgoing, and Network
on again.
T1 Networking - Revised April 2000
Quick-Start Programming
DBS-2.3/9.2-540