Panasonic DBS Section 540 Reference Manual page 108

Network Attendant Call
3. Complete the call and replace the handset.
To dial the local attendant (when the network attendant is located at
another DBS):
1. Pick up the handset or press ON/OFF.
2. Enter the local DBS access code (1-4) followed by "0."
3. Complete the call and replace the handset.
To dial an attendant located at another DBS:
1. Pick up the handset or press ON/OFF.
2. Enter the DBS access code (1-4) followed by "0."
3. Complete the call and replace the handset.
Related Programming
• FF1 (System) Network Attendant
• FF1 (System): Second Attendant Position
• FF1 (System): Third Attendant Position
Page 108
• "Call-EXT XXXX" (where "XXXX" is the extension) appears on the
display if your extension is set for Tone Calling.
The EXT LED goes off.
The phone issues intercom dial tone.
• "Talk-EXT XXXX" (where "XXXX" is the extension) appears on the
display if your extension is set for Voice Calling.
• "Call-EXT XXXX" (where "XXXX" is the extension) appears
"XXXX" appears on the display
The phone issues intercom dial tone.
• The DBS "NET TALK GN" (where "N" is the network trunk group
number) appears on the display.
• An FF key LED lights if assigned to the network trunk or the EXT
LED lights.
T1 Networking - Revised April 2000
Network Feature Operation
DBS-2.3/9.2-540