Safety Instructions - NEC LC15m User Manual

Monitor_UG_01.book Page 4 Monday, October 10, 2005 3:47 PM
4 - Monitor User's Guide

Safety Instructions

To prevent any injuries, the following safety precautions should be observed in the
installation, use, servicing and maintenance of this equipment.
Before operating this equipment, please read this manual completely, and keep it
nearby for future reference.
•
Do not place the equipment on any uneven or unstable carts,
stands, tables, shelves etc. The equipment may fall, causing
serious injury to children or adults and serious damage
to the equipment itself.
•
Use only a cart or stand recommended by the manufacturer.
This equipment and recommended cart or stand should be
handled with care. Quick stops, excessive force, and uneven
surfaces may cause the equipment and cart/stand to over-
turn.
•
Do not disable the 3-wire grounding type plug. The
grounding pin on the 3-prong plug is an important feature.
Removing the grounding pin will increase the risk of dam-
aging the equipment. If you can not fit the plug into the
electrical outlet, contact an electrician to install a grounding
outlet.
•
Always operate this equipment from the type of power
source indicated on the rear of the serial/model plate.
•
Never overload wall outlets and extensions.
•
Use and handle the power cord with care.
•
Do not place any heavy objects on the AC power cord.
•
Do not pull the AC power cord. Do not handle the AC
power cord with a wet hand.
•
Do not touch the power cord and antenna cable during
lightning.
•
Remove the plug from the wall outlet if the equipment will
not be used for a long period of time.
•
Do not place, use or handle this equipment near water.
•
Never expose the equipment to liquid, rain, or moisture.
Seek qualified service if any of the above is spilled into the
equipment.