NEC LCD4615 - MultiSync - 46" LCD Flat Panel Display Installation Manual

LCD4615 Installation Guide
46" LCD Display
Contents:
Product Description and Notes
Tilt Angle and Rotation
Ventilation Requirements
Display Dimensions
Front, Top & Right Side
Rear & Bottom
Display Dimensions w/Optional Speakers and Stand
Table Top Stand Dimensions
Optional Speaker Dimensions
Dimensions optional Wall Mount
Control Codes

Product Description

Type:
Resolution:
Aspect Ratio:
FCC:
Power Consumption:
Notes
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not intended to
be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally to
fill the screen using the menus (see "Aspect Modes" in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.
Tilt Angle and Rotation
Below are the maximum angles that the monitor can be tilted in the landscape position only.
Landscape 20deg
Max. 20 deg
www.necdisplay.com
LCD Display
1920 x 1080
16:9
Class B
240W (max)
NEC Display Solutions of America, Inc.
Page 1
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Screen Surface: Anti-Reflective
Dimensions:
Weight:
BTU's:
LCD4615
44.2"(W) x 26.2"(H) x 5.1"(D)
52.5 lbs
818 BTU/hour
Page 1 of 9
Rev 1.0