Reverse Shifting - Dodge 2015 RAM Owner's Manual

Maximum Recommended Downshifting Speeds
Gear Selection
Maximum 68 mph
Speed (109 km/h)
CAUTION!
If you skip a gear while downshifting or downshift
at too high of a vehicle speed, these conditions may
cause the engine to overspeed if too low of a gear is
selected and the clutch pedal is released. Damage to
the clutch and the transmission can result from
skipping a gear while downshifting or downshifting
at too high of a vehicle speed even if the clutch pedal
is held pressed (i.e., not released).

Reverse Shifting

To shift into REVERSE (R), bring the vehicle to a com-
plete stop. Press the clutch and pause briefly to allow the
6 to 5 5 to 4
50 mph
(80 km/h)
4 to 3 3 to 2
32 mph 19 mph
(51 km/h) (31 km/h)
gear train to stop rotating. Beginning from the NEUTRAL
(N) position, move the shift lever in one quick smooth
motion straight across and into the REVERSE (R) area
(the driver will feel a firm "click" as the shifter passes the
"knock-over"). Complete the shift by pulling the shift
lever into REVERSE (R).
The "knock-over" prevents the driver from accidentally
entering the REVERSE (R) shift area and warns the driver
that they are about to shift the transmission into RE-
VERSE (R). Due to this feature, a slow shift to REVERSE
(R) can be perceived as a high shift effort.
To shift out of REVERSE bring the vehicle to a complete
stop and press the clutch. Shifting out of REVERSE prior
to a complete stop may cause high shift effort.
STARTING AND OPERATING 249
2 to 1
10 mph )
(16 km/h
4