Shutdown And Cleaning - Water-Based Paints - Graco Project Painter Plus 257025 Operation Manual

Warnings

SHUTDOWN AND CLEANING - WATER-BASED PAINTS*

1
ti14956a
Turn power switch OFF. Place suction tube
and drain tube into empty waste pail. Lift
spray/prime valve to PRIME to relieve fluid
pressure.
4
ti14958a
Unscrew inlet screen from suction tube.
Thread power flush attachment onto suction
tube.
6
WASTE
Open
Trigger gun into waste pail for 1-2 minutes
until relatively clear water comes out of gun.
3A0248C
QUICK START-UP GUIDE
2
With the trigger safety ON, remove tip and
guard from gun and place into waste pail
for further cleaning.
5
WASTE
Open
Trigger gun into paint pail and lower spray/prime valve to SPRAY. Turn power
switch ON to push paint in hose into paint pail. When water comes out of the gun,
keep gun triggered and move aim of gun into waste pail.
7
ti14960a
Lift prime/spray valve to PRIME. Let water flow through the sprayer and into waste
pail for 20 seconds.
WARNING
WASTE
Open
ti14961a
3
ti14957a
Thread power flush attachment onto
garden hose. Rinse paint off of suc-
tion tube, drain tube and inlet screen.
ti14959a
PAINT
WASTE
Open
WASTE
7