Sony MHC-GTR8 Operating Instructions Manual page 24

To stop transferring
Press x.
To create a new MP3 file
Press REC TO
"New Track" appears in the display.
If you press REC TO
few seconds, a new MP3 file cannot be
created.
To transfer sound from a
microphone
1
Press PC (or press FUNCTION on
the remote repeatedly until PC
function is selected).
2
Press REC TO
3
Press ENTER.
4
Start singing or speaking into the
microphone.
Notes
• When a new MP3 file is created, transferring
is disabled for the time being.
• "USB" does not lights up for Latin American
and Mexican models.
Tips
• A new MP3 file is created automatically after
approximately 1 hour of transferring.
• Transferring stops automatically when you
change the function or tuner band.
• If distortion happens during transferring,
reduce the microphone level.
• Distortion may occur when you transfer from
your optional component connected to the
VIDEO (AUDIO IN) jack. In this case,
connect it to the PC IN jack and repeat steps 2
to 5 in "Analog Transferring".
24 GB
.
USB
again after a
USB
.
USB
USB-USB Synchronized
Transfer
You can easily transfer the audio files
from an USB device to another USB
device.
1
Connect a transferable USB
device to the
shown below, then connect the
USB device you want to transfer
to A port.
2
Press (or USB on the
USB
remote) to select the USB
function.
Press USB SELECT on the remote
repeatedly to select "[USB A]".
3
Press PLAY MODE on the
remote repeatedly in stop mode
to select the play mode.
The play mode automatically changes
to 1 USB if you start transferring in
ALL USB, ALL USB SHUF, 1 USB
SHUF or PGM mode (when no file is
programmed).
The play mode automatically changes
to if you start transferring in
SHUF mode.
For details about the play mode, see
"To change the play mode" (page 29).
4
Press REC TO
"USB" and "SYNC" light up and
"REC" flashes in the display. "Push
ENTER" appears in the display.
B port as
USB device
.
USB