Sony MHC-GTR8 Operating Instructions Manual page 14

Using the remote
Slide and remove the battery
compartment lid, and insert the two
supplied R6 (size AA) batteries, E side
first, matching the polarities shown
below.
Notes
• If you do not use the remote for a long period
of time, remove the batteries to avoid possible
damage from battery leakage and corrosion.
• When the remote no longer operates the
system, replace both batteries with new ones.
• Batteries installed devices shall not be
exposed to excessive heat such as sunshine,
fire or the like.
Attaching the speaker pads
Attach the supplied speaker pads at each
corner on the bottom of the speakers to
stabilize the speakers and to prevent them
from slipping.
14 GB
Attaching the subwoofer front
panel pads
(For MHC-GTR8 only)
Attach the supplied subwoofer front panel
pads on the bottom of the subwoofers to
stabilize the subwoofers and to prevent
them from slipping.
When carrying the unit
Do the following procedure to protect
the disc mechanism.
Use the buttons on the unit for the
operation.
1
Press "/1 to turn on the system.
2
Press CD.
3
Press OPEN/CLOSE Z to open
the disc tray and remove the
disc.
4
Press OPEN/CLOSE Z again to
close the disc tray. Wait until
"CD No Disc" appears in the
display.
5
Hold down CD and then press
"/1 until "STANDBY" appears
in the display. Then, "MECHA
LOCK" appears in the display.
6
Unplug the AC power cord.