Page 2
Thank you for choosing a Vello Lens Adapter. The Vello C mount adapter allows you to mount photo lenses to your camera. Vello Lens Adapters fit securely to the lens, but not so tightly that they are difficult to remove. Please follow these instructions to mount and remove your Vello Lens Adapter.
Page 3
TO MOUNT THE LENS ADAPTER 1. Rotate the lens adapter clockwise onto 2.Line up the alignment dots on the lens and the camera until it is secure. the lens adapter.
Page 4
3. Rotate the lens until it locks into place. 4. If desired, you can re-align the lens to a specific position. To re-align the lens, use a 2 mm flat-head screwdriver to loosen the three screws on the lens mount. Rotate the lens to the desired position, and tighten the three screws.
Page 5
TO REMOVE THE LENS ADAPTER 1. Pull and hold the release pin on the lens 2. Rotate the lens to release. adapter.
Page 6
Notes: _____________________________________ _____________________________________ _____________________________________ _____________________________________ _____________________________________ ______________________________________ ______________________________________ _____________________________________ 3. Rotate the lens adapter to remove.
Inoperability of the product or part(s) shall be determined by Vello. If the product has been discontinued, we reserve the right to replace it with a model of equivalent quality and function.