Table of Contents
Advertisement
FINISHING
1. Place lava or ember rock around the base of the appli-
ance, making sure not to block any burner ports or valve
access. Retain a small amount of lava rock for step 3 and if
applicable step 4.
2. Place formed charcoal lumps around the front and sides
of the unit.
3. Use remaining lava or ember rock to blend with the char-
coal lumps.
THE RATING PLATE IS
CHAINED TO THE PIEZO
IGNITOR BRACKET AND
SHOULD BE TUCKED UNDER
THE ENTIRE ASSEMBLY.
W415-0530 / 12.14.05
GVFL18
4. GVFL30 ONLY: Sprinkle remaining lava rock onto the outer
fibre ember beds to hide the seam.
RATING PLATE
GVFL24
11
GVFL30
Advertisement
Table of Contents
