Table of Contents
Advertisement
OPERATION
9. Slide pedal between two mounting arms on back
of machine. Align and insert clevis pin through
arms and slot in pedal, secure with cotter pin
(Figure 5).
10. Attach squeegee assembly to bracket. Use (2)
thumb screws to secure (Figure 6).
11. Connect 840mm (33 in) vacuum hose to
squeegee assembly and to neck on machine lid
(Figure 7).
6
FIG. 5
FIG. 6
FIG. 7
MACHINE SETUP
1. Connect 15m (50 ft) power cord to machine pigtail
cord.
2. Plug power cord into a grounded outlet ( Figure 8 ).
Grounded
3 Hole Outlet
Ground Pin
(120V)
FOR SAFETY: Do not operate machine with the
use of additional extension cords. Only use
manufacturer's extension cord equipped with
machine which has proper capacity and is
grounded.
WET VACUUMING
1. Open machine cover and remove vacuum bag
from recovery tank (Figure 9).
2. Make sure automatic float shut-off screen is in
place (Figure10) .
FIG. 10
Grounded
Outlet
Grounding
Edge/hole
(230V)
FIG. 8
FIG. 9
Tennant 3530/3560/3580 (11–99)
Advertisement
Table of Contents
