Table of Contents
Advertisement
Chapter 2
Web Settings
WirelessIP 3000 Web Settings
Overview
This product can be configured via the World Wide Web. WirelessIP3000 Web Settings enables advanced configurations
which cannot be configured with this product.
Notice
When setting via TELNET:
First, prepare the PC to be used for setting the WirelessIP 3000.
Next, perform the network settings that will enable the PC to be connected to the WirelessIP 3000 phone.
When starting up the WirelessIP 3000 web settings, start up the browser from the PC and access
input the IP address or host name of this product into <host>, and the port number into <port> (port number is 8080, this cannot
be omitted).
Access restrictions
The authentication screen for logging in to the WirelessIP 3000 web settings is displayed.
Input the username and password that are set in the WirelessIP 3000 phone and log in.
Management User
Username
admin (default)
Password
000000 (default)
Authority
• setting changes
• firmware upgrade and configuration upgrade
• admin password changes
• stopping the web server
(Note) The same user cannot simultaneously log in from multiple browsers (clients).
General user and admin user are allowed to log in simultaneously.
When using web settings, the web server of this product must be set to "Enable".
The recommended browser is IE5.0 and above.
- 2-2 -
http://<host>:<port>/
. Here,
Advertisement
Table of Contents
