When Wep Is Selected For Mode - Hitachi WirelessIP 3000 Administrator's Manual

Chapter 1 Chapter 3
Administrator Administrator
Network
Settings
Settings

■ When WEP is selected for Mode

If "WEP" is selected as the Mode, for the "Auth Algorithm",
1
Select "Auto", "Open System", or "Pre-shared Key" using the
key .
2
Select "WEP bits" and "Default Key Id".
For the "WEP bits", select "64 bits", "128 bits", or "256 bits" using the
the key.
For the "Default Key Id", Select "1", "2", "3", or "4" using the
key.
Input the WEP key as hexadecimal or alphanumeric. (Refer to the equivalence chart
3
below)
Bit
256 bits
128 bits
64 bits
Encryption Bit Length
128 bits
Input example
64 bits
Input example
Notice
Finally, set using the
Hexadecimal Alphanumeric
58 characters 29 characters
26 characters 13 characters
10 characters 5 characters
Hexadecimal (0– 9, a– f)
26 characters
31:31:31:31:31:31:31:31:31:31:31:31:31
10 characters
31:31:31:31:31
If the WEP key (hexadecimal, alphanumeric) that is input does not fill up
the character count specified in the encryption bit length, the WEP key is
generated by padding the hexadecimal number with additional zeros.
The longer the encryption bit length, the stronger the security.
key.
keys of the
keys of
keys of the
Alphanumeric
13 characters
1111111111111
5 characters
11111
- 1-10 -