Chapter 1
Administrator
Network
Settings
6
Configure the settings for the network authentication method.
For "Mode", select "Disable", "WEB", "8021X-MD5", "8021X-TLS", "8021X-PEAP", or
"8021X-TTLS" using the
If returning to the previous screen, press the
If anything other than "Disabled" is selected, the screen for setting the user ID and
password is displayed. Input the values as prompted on screen.
Finally, press the
7
Configure the settings for NAT Traversal.
For "Mode", select "Disable", "SNAT", "UPnP", or "STUN" using the
If returning to the previous screen, press the
If "SNAT" or "STUN" is selected, the respective setting screens are displayed. Input
the values as prompted on screen.
Finally, press the
keys.
key.
key.
key.
keys.
key.
- 1-6 -