Table of Contents
Advertisement
WirelessIP-5000 Web Interface Manual
1. WirelessIP-5000 Web Interface
1.1 Abstract
It is possible to use your web browser to configure the settings for the WirelessIP-5000. By using the Web
Interface, you can configure detailed settings that cannot be set via the terminal itself.
1.2 Starting Up
To start up the WWW Management Interface, start the web browser on the client terminal and access this
address: http://<host>:<port>/For <host>, insert the IP address or host name for the terminal that you want to
configure, and for <port>, insert the port number (the port number is 8080, and cannot be omitted). If you
don't know your phone's IP, follow this sequence in your phone: [Menu]
TCP/IP
Note 1: Please do not use the interface from more than one browser (client) at a time. This can result in a
difference between the content of the database and the displayed information.
2. Configuration Menu
The Web Management Interface is made up of three screens: "Main Page", "Configuration", and "System
Setup". A description of each screen follows.
2.1
Main Page
This screen displays the terminal's software version, TCP/IP settings, and other basic information.
(Displayed items in Figure 1)
・MODEL: The terminal's model name
・SOFTWARE VERSION: The terminal's software version
・IP ADDRESS: The terminal's IP address
・NETMASK: The terminal's netmask
WirelessIP-5000
Keison Products
www.keison.co.uk
(Figure 1)
© Copyright2004, Hitachi Cable and ABP Technology, All rights reserved
sales@keison.co.uk
5. Setup
6. Information
Tel: +44 (0)1245 600560
1.
- 2 -
Fax: +44 (0)1245 600030
Advertisement
Table of Contents
