Wireless Lan; Encryption - Hitachi WirelessIP 3000 Administrator's Manual

Chapter 1 Chapter 3
Administrator Administrator
Network
Settings Settings

■ Wireless LAN

The SSID that identifies the access point can be set.
1
From the Config1(profile name) menu,
Select "2. WLAN" using the
and set using the
2
Select "Edit" using the
Input the SSID value of the wireless LAN to be connected to.
If left blank, connection is made to the access point having the strongest wave signal
from among the access points that can be connected to.
Finally, save using the

■ Encryption

These settings are related to encryption. This product supports encryption based on WEP (64/128/256 bits).
1 From the Config1(profile name) menu,
Select "3. Security" using the
and confirm using the
2
Select "Edit" using the
For "Mode", select "Disabled", "WEP", or "WPA-PSK" using the
key.
Mode Explanation
WEP Based on the WEP key that was set, an effectively secure method for
encrypting wireless communications data is made.
WPA-PSK This is the method to encrypt wireless communications data based on a
pre-shared key set in both this product and the connected device. As the
encryption key is replaced automatically, strong security can be
achieved.
keys of the
key.
key.
key.
keys of the
key.
key.
key,
key,
keys of the
- 1-9 -