Siemens Gigaset SL78H Manual page 26

your handset to the type of Calling Line
Identification used.
v
Open the main menu
*#Q5#2Q
Press these buttons.
~
Set Calling Line Identification to
0 if you have CLIP (CLIP FSK or
CLIP DTMF) and press
~
If you have no CLIP, enter the
number of digits (1-9) transmit-
ted and press
setting is 7 digits. Please ask
your provider if you wish to
know how many digits of the
caller's number are transmitted
and identified by the Russian
AON.
If the number of the caller is saved in your
directory, you will see their name, and if you
have assigned a caller picture to that caller,
this will also be displayed after a short delay
if you have the CallerID service of your pro-
vider and identification is successful.
If you have no CallerID (CLIP) service but
wish to see the number or the name of a
caller, press the left display key
appears some seconds after you have
started a call) and you will see the caller's
number if identification is successful.
ØÙÚ
1234567890
Accept Silence
1 Ringtone icon
2 Number or name of the caller
§OK§
.
§OK§
. The factory
AON
(it
Gigaset SL78H
1
2
If you do not have the CLIP service,
is displayed instead of the number:
u
If no number is transmitted.
u
AON
If the key has not been pressed.
u
If the caller has not arranged Calling Line
Identification.
If you have the CLIP service, the following is
displayed in place of the number:
u
External, if no number is transmitted.
u
Withheld, if the caller has not arranged
Calling Line Identification.
You can accept the call by:
¤
Pressing the talk key c.
¤
Pressing the speaker key d.
¤
Gigaset SL780: Press the display key
§Accept§
.
¤
Gigaset SL785: Press the display key
to divert the call to the answering
machine.
If the handset is in the charging cradle and
the Auto Answer function is activated
¢
( page 43), the handset will take a call
automatically when you lift it out of the cra-
dle. Please note that to display the caller's
phone number or name (see next section),
§CLIP§
the display key must be pressed before
the call is accepted.
To deactivate the ring tone, press the
display key. You can take the call as long as it
is displayed on the screen.
Accepting a call on a Bluetooth
headset
Precondition: Bluetooth is activated; a con-
nection has been established between the
Bluetooth headset and the handset
¢
( page 39).
Only press the talk key on the headset
when the headset rings; it can take up to 5
seconds.
For further details about your headset, see
the user guide issued with it.
Making calls
External
Ô
§Silence§
25